------------------------------------------------------------------------ HP ChemStation Revision Update from A.05.02/03 to A.05.04 ------------------------------------------------------------------------ NOTE: - This Update Disk includes all changes from the previous A.05.03 update. - It can be installed on top of revision A.05.02 or A.05.03. ------------------------------------------------------------------------ Software Release Bulletin This Software Release Bulletin documents the enhancements incorporated in this update to A.05.04 relative to revision A.05.02. Product Numbers: ---------------- G2070AA HP GC ChemStation Software G2071AA adds control of and data acquisition from an additional HP GC G2072AA GC A/D ChemStation Software G2073AA adds control of and data acquisition from an additional HP A/D G2090AA (2D) Data-Analysis Only G2170AA HPLC 2D ChemStation Software G2171AA adds control of and data acquisition from an additional HP LC G2172AA adds control of and data acquisition from an additional HP CE G2180AA adds LC DAD spectral evaluation to an existing HP LC ChemStation G2190AA (3D) Data-Analysis Only G1601A HP3D CE ChemStation Software G2710AA LC/MSD ChemStation Software G2715AA LC/MSD ChemStation Add-On Software G1115AA UV/Vis General Purpose ChemStation G1116AA Advanced Add-on Mode G1117AA Biochemical Add-on Mode G1118AA Dissolution Add-on Mode Changes relative to revision A.05.02 ------------------------------------ The revision string is changed to A.05.04. The follwing defects have been fixed with this release: ************************************************************************ SR # 5003390716 GC/LC/CE CHEMSTATION G2070AA 05.01 Sev: S Pri: 2 Peak grouping in A.05.01 scrambles group names. ************************************************************************ SR # B400108316 GC/LC/CE CHEMSTATION G2070AA 05.02 Sev: S Pri: 2 A GPF is produced in HPVT00.DLL when starting a third HPCE Session ************************************************************************ SR # B400108787 GC/LC/CE CHEMSTATION G2070AA 05.02 Sev: S Pri: 2 Temperature of thermostatted autosampler can not be set. ************************************************************************ SR # B400108779 GC/LC/CE CHEMSTATION G2070AA 05.01 Sev: S Pri: 2 If there is a fault on the MSD, the MSD icon does not turn red. ************************************************************************ SR # NONE GC/LC/CE CHEMSTATION G2070AA 05.01 Sev: Pri: Miscellaneous MSD driver and status reporting errors including: MSD shutdown is not reported Power fail error is not cleared SCAN/SIM switch after method edit can abort ChemStation session ************************************************************************ SR # B400108977 UV/VIS CHEMSTATION G1115A 05.02 Sev: M Pri: 3 Blank Spectrum Disappeares Immediately After Display of the Measurement. ************************************************************************ SR # B400108985 UV/VIS CHEMSTATION G1116A 05.02 Sev: M Pri: 4 Activated Pre/Post Measure Macros Lead to Syntax Error. ************************************************************************ SR # B400108688 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 5 System hangs up with blank measurement because of no 'Diss. Run' action. ************************************************************************ SR # B400108894 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 5 Blank Measurement in Multibath Dissolution Testing Leads to Error 19006 ************************************************************************ SR # B400108902 UV-VIS DISSOL. MODE G1118A 05.02 Sev: L Pri: 5 About box disappeared immediately after display when dissolution-run has been started for first time. ************************************************************************ SR # B400108910 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 4 Start a dissolution run and switch to another view. When the drop cycle is active press stop on the drop cycle window. If the bath from the current view is already in run it is stopped, too. ************************************************************************ SR # B400108928 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 4 Automation locks up if a dissolution run without any entry in the run table is started. This happens only with the valve sampling system. ************************************************************************ SR # B400108936 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 3 Dissolution result file dialog box sometimes return with the message "Stopped automation because of missing result file name!" despite a file name was entered and OK was clicked. ************************************************************************ SR # B400108944 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 3 Any load file browser box may lock ChemStation if a dissolution is running while the box is open for a longer time. ************************************************************************ SR # B400108951 UV-VIS DISSOL. MODE G1118A 05.02 Sev: M Pri: 3 Matchfactor aborts automation execution if zero vessels measured before. No other new features or defect fixes have been implemented. The operating system and PC hardware requirements are identical to revision A.05.02. Installation of the Update -------------------------- Installing this update requires an existing installation of the HP ChemStation A.05.02 or A.05.03. Please update to revision A.05.02 if you are running an earlier version. No update is performed if a revision earlier than A.05.02 is installed on your computer. To install, close the HP ChemStation. Insert the update disk into the flexible disk drive of your computer. At the command prompt, type: A: HPUPDATE If your original HP ChemStation is installed in a directory other than C:\HPCHEM (for example: D:\HPCHEM), type the following command at the Command Prompt: A: HPUPDATE D:\HPCHEM Copyright by Hewlett-Packard Co. 1990-1997 Edition Date 26-November-1997